PG&E Interconnection Guide

Interconnection Guide

Date: 2025/02/26
Source: lunarenergy.com


Start Application

Item 1 Select: 'Option2-ConnectSolarPanels,WindTurbines,orOtherGeneratingEquipment'
Item 2 Select:'Option1-SimpleSolar,Windand/orEnergyStorage'
Item 3 Select:'Option2-StandardNEMwithEnergyStorage'

Project Information

Customer and Facility Info

Program Confirm selection:'Simple Solar, Wind and/or Energy Storage'
Subprogram Confirm selection:'Standard NEM with Energy Storage'
Service Type Select:'New Generating Facility(Existing Electrical Service)'
Electrical Service Agreement Number Enter/paste Service Agreement ID:
ENERGY STATEMENT
Account No:
Statement Date: 07/12/2024
Due Date: 08/02/2024
Details of Gas Charges
06/07/2024-07/08/2024(32 billing days)
Service For:
Service Agreement ID:
Rate Schedule G1 XB Residential Service
06/07/2024-06/30/2024Your Tier Usage12
Service Information
Meter#
Current Meter Reading 7,275
Prior Meter Reading 7,259
Difference 16
Multiplier 1.044443
Total Usage 17.000000Therms
Baseline Territory X
Serial M

Make sure to enter the ELECTRIC service agreement number and meter, not Gas. The system will not recognize the gas numbers.


Equipment Details System #1

Program Confirm selection:‘Standard NBT/NEM Paired Storage’
Tech Type Select dropdown:‘Solar PV’
Generator Type Select dropdown:‘Inverter-External’
Fuel Type Select dropdown:‘Solar’
Will this Generator be used as a Backup? Select:‘Yes’
How will the generator act as a back-up? ATS
Please Select an Anti-I Island Detection Method Select:‘Group 1: Frequency Shift with continuous positive frequency feedback’
Please provide method of Transition Open
Do you plan to limit export? Select:‘No’
Manufacturer Select dropdown:‘Lunar Energy, Inc.’
Model Select dropdown:‘LE-ESS-20KWH [240V] [SI1-SB]+10-005025[240V]’
Quantity Enter/paste inverter quantity:‘1’

System #1 - Power Module #1 for PV modules

Add Power Module Click button: '+ Add Power Module'
Tech Type Select dropdown: 'solar PV'
Generator Type Select dropdown: 'PV Panels'

Fuel Type Select dropdown:‘Solar’
Manufacturer Select dropdown, specific to project
Model Select dropdown, specific to project
Quantity Enter/paste module quantity

System #1 - Power Module #2 for DC-coupled Lunar Battery

Add Power Module Click button: '+ Add Power Module'
Tech Type Select dropdown: 'Storage'
Generator Type Select dropdown: 'Battery'
Fuel Type Select dropdown: 'Onsite Renewable'
Enter Manufacturer Not In List Leave unchecked
Manufacturer Select dropdown: 'Lunar Energy, Inc.'
Model Select dropdown: 'LE-ESS-20KWH [SI1-SB][DC]'
Software Version 0
Charging Mode No Grid Charging
Exporting to Grid? Yes
Operating Mode Parallel Only(No Export)
Quantity 1
Maximum Storage Capacity(kWh) 20
Estimated Annual Net Energy Usage for Energy Storage Device(kWh) 0

Will the Distribution System be used to charge the storage device? Select: “No”
Charging Function Rated Charge Demand(Load kW) 6.67

Usage and Production

| Estimated Solar Annual Production | Lunar Note

You will get a very high PV estimate. Lunar has flagged this issue to PG&E. PG&E has an advice letter ongoing with California public utilities commission to have the calculations switched, until then the issue will remain as it is and is known by all parties. | | --- | --- | | Planned Increase In Annual Usage(kWh) | Annual usage + Increase in annual usage = 100% of solar annual production estimate |

Documents

Transfer Switch Scheme Documentation See Lunar Bridge specification in the Lunar System Datasheet on Documentation Center
Manufacturer's Documentation for Anti-islanding Method See Declaration of Conformity on Anti-Islanding on Documentation Center

Revision History

Revision Description of Change Effective Date
1 Initial Release 2/26/2025
2 Minor update on dropdown value 4/11/2025